Katariya Steel

Hastelloy C276 Pipe Fittings Manufacturer

Katariya Steel manufactures and exports a wide range of Hastelloy C276 Pipes Fittings to our clients, leveraging our extensive industry knowledge.

Hastelloy C276 Pipes Fittings are a nickel-molybdenum-chromium superalloy with tungsten added to it. The alloy has excellent corrosion resistance in a wide range of harsh conditions. The alloy's high proportions of nickel and molybdenum make it exceptionally resistant to pitting and crevice corrosion under reducing circumstances, while chromium gives resistance to oxidizing environments. The low carbon concentration reduces carbide precipitation during welding, allowing as-welded structures to be corrosion-resistant. This alloy resists the production of grain boundary precipitates in the weld heat-affected zone, making it appropriate for most chemical process applications as welded. Even though there are various Hastelloy nickel alloy types, Hastelloy C-276 is by far the most often utilized. This alloy is one of the few materials that can tolerate the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide. It is also resistant to saltwater corrosion in crevice circumstances, which can aggressively attack other regularly used materials.

Hastelloy C276 Pipe Fittings, Hastelloy C276 Buttweld Fittings, Hastelloy C276 Buttweld Pipe Fittings, Hastelloy C276 Seamless Fittings Stockist, UNS N10276 Pipe Elbow, Hastelloy C276 Pipe Fittings Manufacturer In Mumbai, India.

Hastelloy C-276 Pipes Fittings may be forged utilizing the hot-upset method and the impact-extruded process. Despite its tendency to work-harden, this alloy may be spun, deep-drawn, punched, or press-shaped. All typical welding procedures are acceptable, albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. Hot forming should be done at temperatures ranging from 1600°F to 2250°F (870°C to 1230°C), with heavier parts being heated to a minimum of 2000°F before forming. After working, the material should be annealed at a temperature between 2050°F and 2150°F, followed by rapid cooling in a protected environment.

Hastelloy C276 pipe fittings are widely recognized as the most versatile corrosion-resistant alloy available. These tubes are commonly found in bellows, maritime hardware, chemical processing, agrichemical production, pollution control, pulp and paper manufacturing, industrial as well as municipal waste treatment, and petrochemical production.

Katariya Steel Distributors also offer these Hastelloy C276 welded pipes in customized sizes and shapes to esteemed clients.

2.4819 Buttweld Reducer, ASTM B366 Hastelloy C276 Fittings, ASME SB366 C276 Buttweld Pipe Cross, ANSI B16.9 Hastelloy C276 Tee, Nickel Alloy C276 BW Cap, Hastelloy C276 Pipe Fittings Supplier in India.

Specification For Hastelloy C276 Pipe Fittings

Hastelloy C276 Pipe Fittings Standard ASTM B366 / ASME SB366
Hastelloy C276 Pipe Fitting Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Hastelloy C276 Pipe Fitting Dimensions Size Range Seamless Butt Weld Fittings: 1/2" - 10", Welded Butt Weld Fittings: 1/2" - 48"
Hastelloy C276 Pipe Fittings Type Seamless / Welded / Fabricated
Hastelloy C276 Pipe Fittings Schedule Sch 5 TO Sch XXS.
ASTM B366 Hastelloy C276 Pipe Fittings Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Grades Hastelloy C276, C22, C4, C2000, B2, B3, X Pipe Fittings

Equivalent Grades Of Hastelloy C276 Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy C276 Pipe Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
Hastelloy C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Hastelloy C276 Pipe Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Ready Stock Of Hastelloy C276 Pipe Fittings Supplier

  • C276 Hastelloy 180° LR Return Bend
  • Hastelloy® Alloy C276 90° Seamless Elbow
  • Hastelloy C276 10D Elbow
  • ASTM B366 Hastelloy C276 Lateral Tee
  • ASME B16.9 Hastelloy C276 Pipe Nipple
  • Hastelloy 2.4819 Lap joint Stub Ends
  • Hastelloy C276 Buttweld Equal Cross
  • Hastelloy C276 SR Elbow
  • C276 Hastelloy LR Elbow
  • Hastelloy N10276 Buttweld Fittings
  • Hastelloy 2.4819 Short Radius Elbow
  • Hastelloy C276 Barred Tee
  • Hastelloy C276 Reducing Nipple
  • Hastelloy Gr C276 Industrial Pipe Fittings
  • Type C276 Hastelloy Seamless Pipe Fittings
  • Hastelloy C276 Reducing Tee
  • Hastelloy C276 Weldable 1.5D Elbow
  • Hastelloy® Alloy C276 Welded Lateral Tee
  • UNS N10276 Hastelloy Swage Nipple
  • C276 Hastelloy® Alloy Pipe Fittings

Hastelloy C276 Pipe Fittings Dimensional Tolerances

(1) Out-of-round is the sum of absolute values of plus and minus tolerance. 
(2) The inside diameter at ends and the nominal wall thicknesses are to be specified by the purchaser. 
 IN ACCORDANCE WITH ASME B16.9 – B16.28 
All Fittings
90°and 45° Ells and Tees Reducers and Lap Joint Stub Caps 180° Returns Angularity Tol
Nominal Pipe Plane Size (NPS) Outside(1) Diameter at Bevel Inside(1) Diameter at End Wall(2) Thickness Centre-to- End Dimension A,B,C,M Overall Length L Overall Length E Centre-to- Centre Dimension O Back-to- Face Dimension K Alignment at Ends U Nominal Pipe SIze Off Angle Q Off Angle P
1/2 TO 2-1/2 +1/16 ±1/32 Not less than 87-1/2% of Normal Thickness ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 12 to 4 1/32 1/16

-1/32






5 to 8 1/16 1/8
3 TO 3-1/2 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 10 to 12 3/32 3/16
4 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 14 to 16 3/32 1/4
5 TO 8 +1/32 ±1/16 ±1/16 ±1/16 ±1/4 ±1/4 ±1/4 ±1/32 18 to 24 1/8 3/8

-1/16









10 TO 18 +1/16 ±1/8 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16  All dimensions are in inches 

-1/8






20 TO 24 +1/4 ±3/32 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16

-3/32






People also Search for Hastelloy C276 Pipe Fittings

Hastelloy C276 Long Radius Bend, Hastelloy C276 Pipe Fittings Catalogue, Hastelloy C276 Pipe Fittings in India, Hastelloy C276 Pipe Fittings in Mumbai, Hastelloy C276 Buttweld Elbow Price, Hastelloy Alloy C276 Pipe Fittings Manufacturer In Mumbai, Hastelloy C276 Industrial Pipe Fittings Dealer, Hastelloy C276 Eccentric Reducer at Best Price, Hastelloy Alloy C276 Pipe Fittings Supplier In India, Grade C276 Hastelloy Buttweld Fittings Dimensions, Hastelloy Alloy C276 Pipe Fittings Manufacturer In India, ASTM B366 Alloy C276 Long Stub End, C276 Hastelloy Pipe Fittings Manufacturers In Mumbai, Hastelloy Alloy C276 Pipe Fittings Supplier, C276 Hastelloy Alloy Pipe Fittings Supplier In Mumbai, Alloy C276 Welded Fittings, ANSI B16.9 Hastelloy C276 Pipe Bend, Hastelloy® Alloy C276 Pipe Fittings Manufacturer In Mumbai, Hastelloy C276 Butt Weld Pipe Elbow Manufacturer In India, Hastelloy C276 Welded Pipe Elbow, ASTM B366 C276 Hastelloy Alloy Buttweld Fittings, Hastelloy Alloy C276 Pipe Fittings in India, Hastelloy C276 Piggable Bend Suplier In India, Nickel Alloy C276 Pipe Fittings Supplier In India, C276 Hastelloy Straight Cross, Hastelloy C276 90° Elbow, Hastelloy C276 Short Radius Elbow Stockholder, Hastelloy C276 Reducer, Nickel Alloy C276 Pipe Fittings Supplier In Mumbai, C276 Hastelloy Buttweld Fittings Price List In Mumbai, Hastelloy 2.4819 Pipe Fittings, C276 Hastelloy Tee Dimensions, ASME SB366 Hastelloy C276 Pipe Nipple, Hastelloy C276 Seamless Pipe Fittings Exporter, Hastelloy C276 Pipe Fittings Manufacturers In India, Hastelloy C276 Weldable Pipe Fittings, Hastelloy C276 Pipe Fittings Price List, Hastelloy Alloy C276 Pipe Fittings Supplier In Mumbai, Hastelloy C276 180 Deg Bend, C276 Hastelloy Alloy Pipe Fittings Supplier, Hastelloy C276 Reducing Nipple, Hastelloy Alloy C276 Pipe Fittings Manufacturer, ASTM B366 C276 Hastelloy 180° Return Bends, Hastelloy C276 Pipe Fittings Price, Hastelloy C276 Equal Tee, C276 Hastelloy Alloy Pipe Fittings Manufacturer In Mumbai, Hastelloy C276 45 Deg Elbow, C276 Hastelloy Pipe Cap, Hastelloy C276 Pipe Fittings Suppliers, Hastelloy C276 Seamless Elbow, ASTM B366 C276 Hastelloy Pipe Fittings, ASME SB366 C276 Hastelloy 45° Elbow, C276 Hastelloy Alloy Pipe Fittings Supplier In India, C276 Hastelloy Alloy Pipe Fittings Manufacturer.

Hastelloy C276 Pipe Fittings Applications and Uses

Aerospace Industry

Oil & Gas Industry

Petrochemical Industry

Construction Industry

Mining Industry

Domestic Supply of Hastelloy C276 Pipe Fittings

  • Thane
  • Pune
  • Indore
  • Chennai
  • Nagpur
  • Ludhiana
  • Ranchi
  • Rajkot
  • Hyderabad
  • Kolkata
  • Jaipur
  • Haryana
  • Secunderabad
  • Surat
  • Howrah
  • Gurgaon
  • New Delhi
  • Noida
  • Faridabad
  • Navi Mumbai
  • Jamshedpur
  • Ahmedabad
  • mumbai
  • Ernakulam
  • Kanpur
  • Bhopal
  • Chandigarh
  • Bengaluru
  • Visakhapatnam
  • Thiruvananthapuram
  • Pimpri-Chinchwad
  • Nashik

International Supply of Hastelloy C276 Pipe Fittings

  • India India
  • Japan Japan
  • Russia Russia
  • United States United States
  • Saudi Arabia Saudi Arabia
  • Kuwait Kuwait
  • Singapore Singapore
  • Malaysia Malaysia
  • Germany Germany
  • Italy Italy
  • China China
  • UK UK
  • Canada Canada
  • Iran Iran
  • Thailand Thailand
  • South Korea South Korea
  • Turkey Turkey
  • Morocco Morocco
  • Costa Rica Costa Rica
  • Kazakhstan Kazakhstan
  • Philippines Philippines
  • Egypt Egypt
  • Vietnam Vietnam
  • Oman Oman
  • Australia Australia
  • Qatar Qatar
  • Portugal Portugal
  • Mexico Mexico
  • Brazil Brazil
  • France France
  • South Africa South Africa
  • Jordan Jordan
  • Spain Spain
  • Hong Kong Hong Kong
  • Netherlands Netherlands
  • Indonesia Indonesia
  • Taiwan Taiwan
  • Nigeria Nigeria
  • Bangladesh Bangladesh
  • Iraq Iraq
  • Ukraine Ukraine
  • Poland Poland
  • Romania Romania
  • Cyprus Cyprus
  • Angola Angola
  • Colombia Colombia
  • Norway Norway
  • Chile Chile
  • Tobago Tobago
  • Greece Greece
  • Czechia Czechia
  • Belgium Belgium
  • Sri Lanka Sri Lanka
  • Myanmar Myanmar
  • Venezuela Venezuela

We’re Good in All
Steel Works

Expert & Professional
Workers

Very Reasonable
Price

©2022 katariyasteel, All Rights Reserved
Design & Promoted By RATH INFOTECH