Katariya Steel

Stainless Steel 310 / 310S Pipe Fittings Manufacturer

  • Home
  • Stainless Steel

Katariya Steel is a leading supplier of Stainless Steel 310/310S Pipe Fittings We offer top quality products at the best prices. We are trusted by our customers all over the world. All our products undergo a strict quality check process to ensure that only the best quality Stainless Steel 310/310S Pipe Fittings are dispatched.

Stainless Steel 310/310S Pipe Fittings are made from an austenitic stainless steel designed to withstand high temperatures and corrosion. Under gently cyclic circumstances, the alloy resists oxidation up to 2010 degrees Fahrenheit. Alloy 310 is resistant to sulfidation and can be utilised in mildly carburizing environments because of its high chromium and moderate nickel concentration. Although slightly oxidising, nitriding, cementing, and thermal cycling applications are possible with Stainless Steel 310/310S Pipe Fittings, the maximum service temperature must be decreased. With low magnetic permeability and toughness down to -450 degrees Fahrenheit, Stainless Steel 310/310S Pipe Fittings can also be used in cryogenic applications.

Stainless Steel 310 Pipe Fittings, Stainless Steel 310 Buttweld Fittings, Stainless Steel 310 Seamless Pipe Fittings Stockist, SS 310 Pipe Fittings, 310 SS Butt weld Fittings, 310 Stainless Steel Buttweld Fittings, UNS S31000 Pipe Fittings, Stainless Steel 310 Pipe Fittings Manufacturer In Mumbai, India.

Stainless Steel 310S Pipe Fittings have a low carbon content when compared to Stainless Steel 310 Pipe Fittings. The grain size and carbon content of the fittings meet the 310S standards. Due to the lack of molybdenum in the alloy, pitting resistance is weak. After service at temperatures between 550 and 800°C, Stainless Steel 310/310S Pipe Fittings become susceptible to intergranular corrosion. At temperatures above 100°C, chloride stress corrosion cracking can occur in corrosive liquids containing chlorides.

Stainless Steel 310/310S Pipe Fittings are used in a wide range of applications such as Cryogenic Components, Food Processing, Furnaces, Fluidized Bed Furnaces, Ore Processing/Steel Plants, Petroleum Refining, Power Generation, Sintering/Cement Plants, Thermal Processing, etc.

ANSI B16.9 Stainless Steel 310S Buttweld Fittings, 310S Stainless Steel Pipe Fittings Suppliers, SS 310S Pipe Fittings, ASTM A403 WP310S Pipe Fittings, SS 1.4845 Buttweld Fittings, ASME SA403 WP310S Buttweld Fittings, Stainless Steel 310S Pipe Fittings Supplier in India.

Specification For SS 310 / 310S Pipe Fittings

SS 310/310S Pipe Fittings Standard ASTM A403 / ASME SA403
SS 310 & 310S Pipe Fitting Dimensions ANSI B16.9, B16.25, B16.28, MSS-SP-43, MSS-SP-48, MSS-SP-59
SS 310/310S Buttweld Fittings Schedule SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
Stainless Steel 310/310S Pipe Fittings Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
SS 310-310S Pipe Fittings Size Range Seamless Butt Weld Fittings : 1/2" - 10"
Welded Fittings : 1/2" - 48"
ASTM A403 WP310 / 310S Pipe Fittings Manufacturing process Push, Press, Forge, Cast, etc.
Packing of Products Wooden Pallet, Canton, Carton / Small Box or as required, or as per Customers Requests

Equivalent Grades Of Stainless Steel 310 / 310S Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 – X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 – X8CrNi25-21

SS 310 / 310S Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2.0 max 0.15 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2.0 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

310 / 310S SS Pipe Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Ready Stock Of Stainless Steel 310 / 310S Pipe Fittings Supplier

  • ASME B16.9 Stainless Steel 310S Pipe Nipple
  • ASTM A403 WP 310S Stainless Steel Lateral Tee
  • 310 Stainless Steel LR Elbow
  • SS 1.4845 Lap joint Stub Ends
  • SS 310 Buttweld Equal Cross
  • SS 310 SR Elbow
  • SS 310S 90° Seamless Elbow
  • 310S Stainless Steel 180° LR Return Bend
  • Stainless Steel 310 Weldable 1.5D Elbow
  • 310S Stainless Steel Pipe Fittings
  • Stainless Steel 310S Eccentric Reducer
  • Stainless Steel 310S Barred Tee
  • SS 1.4841 Short Radius Elbow
  • 310 Stainless Steel Reducing Nipple
  • Stainless Steel S31000 Buttweld Fittings
  • UNS S31008 Stainless Steel Swage Nipple
  • SS 310 Welded Lateral Tee
  • Stainless Steel 310S 10D Elbow
  • Type 310 Stainless Steel Seamless Pipe Fittings
  • SS Gr 310 Industrial Pipe Fittings
  • Stainless Steel 310 Reducing Tee
  • 310S Stainless Steel End Pipe Cap

Stainless Steel 310 / 310S Pipe Fittings Dimensional Tolerances

(1) Out-of-round is the sum of absolute values of plus and minus tolerance. 
(2) The inside diameter at ends and the nominal wall thicknesses are to be specified by the purchaser. 
 IN ACCORDANCE WITH ASME B16.9 – B16.28 
All Fittings
90°and 45° Ells and Tees Reducers and Lap Joint Stub Caps 180° Returns Angularity Tol
Nominal Pipe Plane Size (NPS) Outside(1) Diameter at Bevel Inside(1) Diameter at End Wall(2) Thickness Centre-to- End Dimension A,B,C,M Overall Length L Overall Length E Centre-to- Centre Dimension O Back-to- Face Dimension K Alignment at Ends U Nominal Pipe SIze Off Angle Q Off Angle P
1/2 TO 2-1/2 +1/16 ±1/32 Not less than 87-1/2% of Normal Thickness ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 12 to 4 1/32 1/16

-1/32






5 to 8 1/16 1/8
3 TO 3-1/2 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 10 to 12 3/32 3/16
4 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 14 to 16 3/32 1/4
5 TO 8 +1/32 ±1/16 ±1/16 ±1/16 ±1/4 ±1/4 ±1/4 ±1/32 18 to 24 1/8 3/8

-1/16









10 TO 18 +1/16 ±1/8 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16  All dimensions are in inches 

-1/8






20 TO 24 +1/4 ±3/32 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16

-3/32






People also Search for SS 310 / 310S Pipe Fittings

Stainless Steel 310S Seamless Pipe Fittings Manufacturer, ASTM A403 310S Stainless Steel Pipe Fittings, Stainless Steel 310S Buttweld Fittings Manufacturer, 310 Stainless Steel Tee Dimensions, Stainless Steel 310S 180 Deg Bend, SS 1.4841 Pipe Fittings, Stainless Steel 310 Seamless Elbow, Stainless Steel 310 Seamless Pipe Fittings Exporter, Stainless Steel 310 Reducing Nipple, ASME SA403 Stainless Steel 310 Pipe Nipple, Stainless Steel 310 Weldable Pipe Fittings, Stainless Steel 310S Pipe Fittings Supplier in Mumbai, Stainless Steel 310 Industrial Pipe Fittings Dealer, Stainless Steel 310 Pipe Fittings Price, SS 310S Pipe Fittings Manufacturer, SS 310 / 310S Pipe Fittings Manufacturer In Mumbai, Stainless Steel 310S Butt Weld Pipe Elbow Manufacturer In India, SS 310 Short Radius Elbow Stockholder, Stainless Steel 310 Buttweld Elbow Price, ASTM A403 WP310 SS 180° Return Bends, Stainless Steel 310 Buttweld Fittings Manufacturer in India, Stainless Steel 310S Welded Fittings, Stainless Steel 310S Buttweld Pipe Fittings Supplier in Mumbai, SS 310S 45 Deg Elbow, ANSI B16.9 Stainless Steel 310S Pipe Bend, SS 310 Pipe Fittings in Mumbai, SS 310 Long Radius Bend, SS 310S Reducer, SS 310 90° Elbow, ASTM A403 WP 310S Long Stub End, 310S Stainless Steel Pipe Fittings Manufacturer in Mumbai, SS 310S Pipe Fittings in Mumbai, 310S SS Buttweld Pipe Fittings Supplier, SS 310 Pipe Fittings Catalogue, SS 310 Pipe Fittings Manufacturer in India, Stainless Steel 310 Pipe Fittings, Stainless Steel 310 Pipe Fittings Supplier in India, Stainless Steel 310 Pipe Fittings Suppliers, 310 Stainless Steel Buttweld Fittings Supplier, 310 Stainless Steel Pipe Fittings Manufacturers In Mumbai, 310S SS Pipe Fittings Manufacturer in Mumbai, ASME SA403 WP 310S SS 45° Elbow, SS 310S Pipe Fittings in India, SS 310 Equal Tee, SS 310S Pipe Fittings Price List, Stainless Steel 310S Piggable Bend Suplier In India, ASTM A403 WP310S Stainless Steel Buttweld Fittings, 310 Stainless Steel Buttweld Fittings Price List In Mumbai, Stainless Steel 310 Welded Pipe Elbow, Stainless Steel 310S Pipe Fittings Manufacturers In India, Grade 310 / 310S Stainless Steel Buttweld Fittings Dimensions, SS 310 Pipe Fittings in India, 310 Stainless Steel Buttweld Fittings Supplier in India, 310S Stainless Steel Pipe Cap, 310S Stainless Steel Straight Cross.

Stainless Steel 310-310S Pipe Fittings Applications and Uses

Aerospace Industry

Oil & Gas Industry

Petrochemical Industry

Construction Industry

Mining Industry

Domestic Supply of Stainless Steel 310 / 310S Pipe Fittings

  • Thane
  • Pune
  • Indore
  • Chennai
  • Nagpur
  • Ludhiana
  • Ranchi
  • Rajkot
  • Hyderabad
  • Kolkata
  • Jaipur
  • Haryana
  • Secunderabad
  • Surat
  • Howrah
  • Gurgaon
  • New Delhi
  • Noida
  • Faridabad
  • Navi Mumbai
  • Jamshedpur
  • Ahmedabad
  • mumbai
  • Ernakulam
  • Kanpur
  • Bhopal
  • Chandigarh
  • Bengaluru
  • Visakhapatnam
  • Thiruvananthapuram
  • Pimpri-Chinchwad
  • Nashik

International Supply of Stainless Steel 310 / 310S Pipe Fittings

  • India India
  • Japan Japan
  • Russia Russia
  • United States United States
  • Saudi Arabia Saudi Arabia
  • Kuwait Kuwait
  • Singapore Singapore
  • Malaysia Malaysia
  • Germany Germany
  • Italy Italy
  • China China
  • UK UK
  • Canada Canada
  • Iran Iran
  • Thailand Thailand
  • South Korea South Korea
  • Turkey Turkey
  • Morocco Morocco
  • Costa Rica Costa Rica
  • Kazakhstan Kazakhstan
  • Philippines Philippines
  • Egypt Egypt
  • Vietnam Vietnam
  • Oman Oman
  • Australia Australia
  • Qatar Qatar
  • Portugal Portugal
  • Mexico Mexico
  • Brazil Brazil
  • France France
  • South Africa South Africa
  • Jordan Jordan
  • Spain Spain
  • Hong Kong Hong Kong
  • Netherlands Netherlands
  • Indonesia Indonesia
  • Taiwan Taiwan
  • Nigeria Nigeria
  • Bangladesh Bangladesh
  • Iraq Iraq
  • Ukraine Ukraine
  • Poland Poland
  • Romania Romania
  • Cyprus Cyprus
  • Angola Angola
  • Colombia Colombia
  • Norway Norway
  • Chile Chile
  • Tobago Tobago
  • Greece Greece
  • Czechia Czechia
  • Belgium Belgium
  • Sri Lanka Sri Lanka
  • Myanmar Myanmar
  • Venezuela Venezuela

We’re Good in All
Steel Works

Expert & Professional
Workers

Very Reasonable
Price

©2022 katariyasteel, All Rights Reserved
Design & Promoted By RATH INFOTECH