What Is Inconel 600 Used For?

Inconel 600 is a high-temperature nickel-chromium alloy with strong oxidation resistance. This alloy is known for their excellent resistance in carburizing and chloride containing environments. This nickel alloy has been designed for operation temperatures ranging from cryogenic to high temperatures below 2000 ° F. It is non-magnetic, has outstanding mechanical properties, and under a large range of temperatures offers the ideal combination of high strength and decent weldability.

Inconel 600, though, is a costly commodity, one that is only saved for the right conditions of use where other products will not function either. Alloy 600’s tolerance to sulfur compounds and different oxidizing conditions is given by the chromium content in them. Under oxidizing conditions, the alloy’s chromium content makes it comparable to commercially pure nickel. 600 has low tolerance to fast oxidizing solutions such as heavy, concentrated nitric acid. Tensile power, corrosion resistance, and even the resistance to melting can be calculated when assessing energy.

Compared with the 73.2 ksi of stainless steel, Inconel 600 has a strong tensile strength range of 103 -160 ksi and can sustain its strength at higher operating temperature. While exact measurements differ, figures published suggest the Inconel 600’s melting point range from 2,350 ° F to 2,460 ° F (1,290 ° C to 1,350 ° C). Alloy 600’s high chromium content increases its oxidation tolerance significantly above that of plain nickel, while its lower nickel content provides good resistance to corrosion under reduced conditions. The material experiences high levels of tension and salt water tolerance, combustion gases, and most organic acids and compounds.

Applications of Inconel 600 Alloy.

The Inconel 600 Pipes are used for a plethora of applications across numerous industries. The Super alloy Inconel 600 can be used in a variety of applications due to its high chemical and temperature resistant qualities. Inconel 600 Flanges alloy also finds itself in applications in extreme environments. Some of the industries that use this alloy are listed below.

Aerospace Industry:

Jet engines are different in that they usually have to tolerate extreme temperatures during use, both high and low. As stated on the website for meteorology preparation, the average air temperature is 56.3° C (-69.3 ° F) at 36,000 ft. (well within the normal cruising altitude of a passenger jet), but the combustion cycle will reach 1.150 ° C (2120 ° F).

Despite rapid changes in temperature from the combustion process and cooling technologies employed in the aerospace industry, Inconel 600 Rods retains high oxidation resistance and tensile strength.

Essentially, Inconel is a perfect commodity if intense temperature and chemical tolerance are a must, and the oxidation resistance of other metals will usually be weakened by any phase where temperature rises.

Oil & Gas Extraction:

Despite its high temperature tolerance and oxidation resistant properties, Inconel 600 Fasteners is best used in the oil and gas extraction industries. As with Inconel 600 alloy, the oil and gas industries require super alloy metal that can survive extreme environments and toxic, corrosive gasses.

The Inconel 600 Super alloy is particularly useful for processing systems needed for the development of natural gas. Thanks to the particularly strong thermal fatigue power and oxidation tolerance of Inconel 600’s, it is often used to detach the collected fluids or in line steel transfer pipes.

Marine Applications

Thanks to its exceptional tolerance to sodium chloride (salt) at a range of levels, Inconel 600 is often used in sea applications. Therefore, Inconel 600 can be suitable for a parts washing basket for operations that use salt or plant positions near the ocean.

Super alloy, though, would only be much more effective than stainless steel grade 316 if extreme temperatures above 1,000 ° F were also a problem. At high temperatures, Inconel 600 would preserve its oxidation strength more than would 316 SS.